© Martin Edwards 2010
Disclaimer: The techniques shown here are representative of the way that I work. I have highlighted certain Health and Safety points throughout but responsibility lies solely with the person who is carrying out the woodturning. Always adhere to safe working practices at all times. Remember the more fingers that you lose, the harder it becomes to turn wood!
Brown Oak Burr Project Page 7
25. After sanding up to 600 grit, use a compressed air gun to remove all the dust from the crevices and on the natural edge.
26. The finished bowl before the Finishing oil has been applied.
27. The bowl after the Chestnut Finishing Oil has been applied. A coat of Wood Wax 22 is used on top of the dried oil to give a softer sheen.